What should I do if the belt in the belt conveyor deviates?

Belt conveyor is a common conveying equipment in organic fertilizer production line. It plays an important role in chemical fertilizer, metallurgy, coal, mining and other industries. Belt deviation is the main possible failure of the belt conveyor. The deviation of the belt will increase the resistance of the belt running and increase the wear between the belt and the frame. We should pay attention to the operation of the conveyor during production, and find out the reasons that may cause the belt to deviate, so as to prevent accidents, reduce conveyor failures, and improve production efficiency.

1. The conveyor belt is worn. After a period of use of a well-run belt, the tension of the belt will change irreversibly, which will reduce the tension of the belt and cause the belt to relax. Therefore, the belt edge will be worn to varying degrees, which will cause the belt to run off. Therefore, during regular maintenance, attention should be paid to adjusting the state of the belt.

2. The pulley and idler of the belt conveyor are stuck with foreign matter. The pulleys and idlers that support the belt are combined with other things, resulting in uneven tension on both sides of the belt, causing the belt to run off. Therefore, it is necessary to keep the production equipment clean and avoid foreign matter from affecting the operation of the equipment.

3. The vibration of the belt conveyor during operation. The belt conveyor will inevitably produce mechanical vibration during operation. The faster the belt runs, the greater the vibration, and the greater the deviation of the belt.

4. For short-line belts, if the belt deviates, it is mainly corrected by adjusting the roller; for long-line belts, the deviation generally only exists on the local belt line, so it can be corrected by adjusting the roller frame near the deviation belt line Partial.