Zhengzhou Tianci Heavy Industry teaches you how to maintain and maintain the compound fertilizer equipment granulator:
Rotary drum granulator is often used in the NPK fertilizer manufacturing process
. Next, let’s take a look at the maintenance and maintenance of drum granulation machine. Only if the machine is well maintained, the granulation process will be smooth and the quality of the obtained fertilizer particles will be better.
Machine maintenance: bearing crusher bearing machine is fully loaded, so well-lubricated bearing life has a great relationship, it directly affects the service life and availability of the machine, and requires that the lubricating oil must be clean, the seal must be good, and the main shaft of the machine : Rotating bearings; rolling bearings; gears; movable bearings and sliding planes. The newly installed tires are easy to loose and must be checked frequently. Pay attention to the working of the machine parts is normal.
Check the wear level of the wearing parts, and pay attention to replace the worn parts at any time. When placing the chassis of the movable unit, the dirt and other materials should be removed to prevent the drum granulation
machine from being unable to move the materials to the chassis when the movable bearing fails, which may cause serious accidents. Bearing oil temperature If the rotating gear is in normal operation, if there is an impact, stop the inspection immediately and eliminate it.
Installation and commissioning: The equipment should be installed in horizontal concrete on the basis of the equipment, and the bolts should be fixed with the ground. When installing, pay attention to the main body and vertical level. After installation, tighten the bolts and the main machine, such as the door is fastened, and control the switch according to the power of the equipment. After inspection, no-load test, test normal production.
The maintenance of compound fertilizer manufacturing equipment
is an extremely important and frequent task. It should be operated and maintained in close cooperation with full-time personnel on duty for inspection.