Precautions for installation of granulator of compound fertilizer production line

2021-03-31

1. Pay attention to balance when installing the NPK fertilizer manufacturing process granulator. Install it on a flat ground and fix it with a foot, so that it will not shake when working.

2. When installing, pay attention to the vertical line between the host and the ground.

3. After installation, check whether the screws of the machine are loose and whether the air box of the main unit door is fastened. If there is any looseness, please reinforce it to avoid accidents.

4. Connect the wires of the machine according to the instructions and check whether the control switch is in good condition.

5. Before using the compound fertilizer production line drum granulation machine, test every aspect of the machine, and the production can be carried out after the test run is normal.

The equipment of the compound fertilizer production line needs regular maintenance. If it is not maintained for a long time, it will seriously affect the life of the equipment and may also bring safety hazards. The following editor will give you a detailed introduction to the maintenance methods of the compound fertilizer production line:

1. After a long period of use, it is necessary to regularly check whether the various components of the compound fertilizer production line equipment are working properly, and if problems are found, they need to be dealt with in time;

2. Bearings need to be lubricated in the use of fertilizer manufacturing equipment. When choosing a lubricant, you must choose a product with good cleanliness and good sealing; 

3. In use, if you find that the temperature of the machine is high, you need to stop working immediately to check the cause of the high temperature. This is very important. If you continue to work under high temperature, it will cause great damage to the equipment of the compound fertilizer production line.

Products
Tel
contact
inquiry