Friends who are new to organic fertilizer production may not know what an
organic fertilizer granulator does. Usually, the production of organic fertilizer goes through the following steps: batching, mixing, granulation, drying, cooling, screening, coating, and packaging. The organic fertilizer granulator acts on the third step.
Operation of an organic fertilizer granulator:
For a disc granulator, the speed and inclination of the disc should be set reasonably. The speed is generally between 1030 rpm, and the inclination is generally between 4060 degrees.
The speed of the stirring teeth of the stirring tooth granulator is also critical, usually between 30 and 100 rpm, and is adjusted according to the viscosity of the raw materials and the desired particle size.
The pressure parameters of the extrusion granulator should be set according to the characteristics of the raw materials and the particle strength requirements.
The feed should be even and sufficient, and the machine feeding speed and feeding speed should be properly coordinated, otherwise it will affect the quality and output of the particles.
During the granulation process, it is necessary to maintain a stable supply of raw materials and avoid feeding too fast or too slow. At the same time, observe the state of the particles during the granulation process and adjust the parameters in time.
There are many kinds of
organic fertilizer granulators, and you can choose the one that suits you according to your actual needs. If you have any questions about this, please contact Huaqiang Heavy Industry. We specialize in the production of various organic fertilizer production equipment.
