How to prolong the service life of NPK fertilizer production line equipment
Granules of compound fertilizer products are made by mixing granulation according to formula, so the nutrient content of granular fertilizer is the same as the standard, and can provide nitrogen, phosphorus, potassium and other nutrients to crops at the same time in a certain proportion. NPK fertilizer production line ensures the balanced growth of crops. In the process of using NPK fertilizer production line, attention should be paid to the maintenance of equipment, and the production effect will be better naturally.
In NPK fertilizer production line, belt conveyor is a more commonly used connecting equipment, conveyor belt is used more. There are some matters needing attention in the use and preservation of conveyor belt. During use, we should keep the conveyor belt clean, avoid direct sunshine or wetting of rain and snow as far as possible, and avoid contact with acid, alkali, oil, organic solvents and other substances, and the conveyor belt should be one meter away from the heating device. In the preservation, the temperature and humidity of the conveyor belt should be appropriate. During the preservation period, the conveyor belt should be placed in rolls and not folded. During the storage period, the conveyor belt should be turned up once a quarter.
Whether the parts of fertilizer granulator mahcine work normally or not also needs attention. Attention should be paid to inspecting the wear degree of wearable parts and replacing the worn parts of granulator at any time. In order to avoid serious accidents, the movable bearing can't move on the chassis when the machine encounters materials that can't be broken.
Bearing bears all the loads of the machine. Therefore, good lubrication has a great impact on the bearing life, which directly affects the service life and operation rate of the machine. Therefore, the injected lubricant must be clean and the seal must be good. Newly installed tyres are prone to loosening and must be checked regularly. In the actual operation, if the rotating gear has impact sound during operation, it should stop immediately to check and eliminate it.